API Settings

The DataXchange API provides access to the data programatically. For security purposes the API is disabled by default. Please contact Scytec support or your reseller for additional API information, activation, and documentation.

​

• Related Articles

• Configure the Mazak API

  Mazak has software on the NC system to control external access. Once the API has been installed on the NC external access must be configured to allow Scytec DataXchange to connect. Select the HOME button in the upper left of the NC screen. Select the ...

• Authentication Settings

  This feature allows configuration of complex passwords within DataXchange as well as offering integration with an LDAP server or Active Directory. More information on managing users can be found here.

• MTConnect - DMG Mori CELOS

  MTConnect is installed on new DMG Mori machines as standard. On a Celos control it must be enabled for use manually. To do so, navigate to the CELOS Connector Management application on the CELOS screen and click Machine Data on the left side. PDF ...

• Logging into DataXchange: ERROR "The Dataxchange server cannot be contacted at this time" received

  When logging into DataXchange, you might receive the following ERROR message "The DataXchange server cannot be contacted at this time". Typically, this occurs when there is an internet problem so try going to dx1.scytec.com in a web browser and see ...

• OPC UA Kepware Setup

  The following is an example setup of an OPC UA Server using Kepware KEPServerEX6 for the OPC UA Source within DataXchange. Once KEPServerEX6 has been installed, run the OPC UA Configuration Manager. This can be done from the Windows Start menu or ...