Authentication Settings

This feature allows configuration of complex passwords within DataXchange as well as offering integration with an LDAP server or Active Directory. More information on managing users can be found here.

• Related Articles

• API Settings

  The DataXchange API provides access to the data programatically. For security purposes the API is disabled by default. Please contact Scytec support or your reseller for additional API information, activation, and documentation.

• Siemens - OPCUA Activation

  OPC UA Activation on a Siemens 840D Solution Line or Simumerik ONE Check to see if you have the option "Access MyMachine /OPC UA 6FC5800-0AP67-0YB0" activated (Startup->Licenses). If the license is not enabled the license will need to be purchased ...

• MTConnect - DMG Mori CELOS

  MTConnect is installed on new DMG Mori machines as standard. On a Celos control it must be enabled for use manually. To do so, navigate to the CELOS Connector Management application on the CELOS screen and click Machine Data on the left side. PDF ...

• Citizen M7 IP Address Configuration

  The IP address is set through parameters on the Citizen M7 control. The first step is to set the password enabling write permissions for the settings. 1. Setting the Password A. Press the MAINT. button on the operation panel. B. Press the I/F Diag ...

• Configuring the Fanuc 31i Control

  The Fanuc control must be configured in order for the communication to take place. The configuration consists of setting standard TCP/IP network properties. The steps to configure the control may vary from model to model. The following steps are for ...