Check the Version of the Okuma THINC API

Check the Version of the Okuma THINC API

The Okuma THINC API notifier can be accessed by going to the Windows System Tray in the bottom right corner of the Windows Taskbar.  

Expand the window by clicking the up arrow in the Taskbar.  If the THINC API is running it will show as an icon labeled API and will be green if it started successfully.

Click the API icon to display the information about the version of the THINC API.


    • Related Articles

    • Configure the Mazak API

      Mazak has software on the NC system to control external access. Once the API has been installed on the NC external access must be configured to allow Scytec DataXchange to connect. Select the HOME button in the upper left of the NC screen. Select the ...

    • MTConnect - Okuma

      After installing the Okuma adapter and agent from the My Okuma store, the setting to Enable Monitoring tags is disabled by default. This needs to be checked in order to collect data. Also, by default all of the tags are enabled. If the machine is ...

    • API Settings

      The DataXchange API provides access to the data programatically. For security purposes the API is disabled by default. Please contact Scytec support or your reseller for additional API information, activation, and documentation.

    • Siemens - Finding the SINUMERIK Operate OPC UA Version

      Press the ‘Machine’ button which is typically in the upper right corner. or Press the Diagnostics button which should be on the bottom or side of the screen Or Press the ‘Version’ button on the bottom of the screen Highlight the ‘System extensions’ ...

    • Siemens - OPCUA Activation

      OPC UA Activation on a Siemens 840D Solution Line or Simumerik ONE Check to see if you have the option "Access MyMachine /OPC UA 6FC5800-0AP67-0YB0" activated (Startup->Licenses). If the license is not enabled the license will need to be purchased ...