Siemens - Finding the SINUMERIK Operate OPC UA Version

Siemens - Finding the SINUMERIK Operate OPC UA Version

Press the ‘Machine’ button which is typically in the upper right corner.

or

Press the Diagnostics button which should be on the bottom or side of the screen


Or

Press the ‘Version’ button on the bottom of the screen


Highlight the ‘System extensions’ row in the list of items


Press the ‘Details’ button on the right side of the screen


Record or take a picture of the version number for ‘opcuas’


    • Related Articles

    • Siemens - Turn on OPCUA

      Turning on OPC UA on a Siemens 840D Solution Line Make sure that you have the option "Access MyMachine /OPC UA 6FC5800-0AP67-0YB0" activated (Startup->Licenses). Note: if your machine is an embedded Siemens control with an overlay from another ...

    • OPC UA Kepware Setup

      The following is an example setup of an OPC UA Server using Kepware KEPServerEX6 for the OPC UA Source within DataXchange. Once KEPServerEX6 has been installed, run the OPC UA Configuration Manager. This can be done from the Windows Start menu or ...

    • OPC UA Communication as a Source

      DataXchange supports OPC UA allowing the retrieval of machine information from supported OPC UA servers. An OPC UA enabled server can be setup as a Source of data within DataXchange.

    • Setting up Kepware to communicate with OPC UA

      A machine operating on the OPC UA protocol typically needs to communicate with a server in order for DataXchange to receive the data from the machine. Other OPC UA server options can work but DataXchange works best with Kepware.

    • MTConnect - DMG Mori CELOS

      MTConnect is installed on new DMG Mori machines as standard. On a Celos control it must be enabled for use manually. To do so, navigate to the CELOS Connector Management application on the CELOS screen and click Machine Data on the left side. PDF ...