Does DataXchange have OEE Calculations?

Does DataXchange have OEE Calculations?

Overall Equipment Effectiveness (OEE) is a hierarchy of metrics developed used to evaluate how effectively a manufacturing operation is utilized. An OEE score of 100% represents perfect production which is manufacturing only good parts, as fast as possible, with no unplanned down time. It is best used to identify scope for process performance improvement, and how to get the improvement. If for example the cycle time is reduced, the OEE will increase. In other words, more product is produced with less resources.





    • Related Articles

    • Using FOCAS in DataXchange

      Focas Communication as a Source Setting the Fanuc Focus communication as a source will be the most common configuration because this will acquire information about the control. Focas Communication as a Target DataXchange can be configured to send ...

    • Using FOCAS in DataXchange

      Focas Communication as a Source Setting the Fanuc Focus communication as a source will be the most common configuration because this will acquire information about the control. Setting up Fanuc Focas as a Source is done by going to the DataXchange ...

    • Using HAAS NGC in DataXchange

      DataXchange supports data collection directly from the HAAS NGC. A HAAS NGC enabled control can be setup as a Source for data within the DataXchange software Setting up HAAS NGC as a Source is done from the DataXchange tab, selecting the associated ...

    • Installing the DataXchange Application on Windows Server

      The DataXchange Windows Application may have trouble downloading and installing on a Windows Server OS. This is because of a registry key that is different in Server OS compared to regular Windows. Change the following registry key if you are unable ...

    • Logging into DataXchange: ERROR "The Dataxchange server cannot be contacted at this time" received

      When logging into DataXchange, you might receive the following ERROR message "The DataXchange server cannot be contacted at this time". Typically, this occurs when there is an internet problem so try going to dx1.scytec.com in a web browser and see ...