Modbus TCP Viewer

The Modbus TCP viewer allows users to connect to Modbus devices directly from the DataXchange Client. This is useful for testing connections to Modbus devices as well as ensuring the expected values are being returned from the device.

​

• Related Articles

• Modbus TCP Source

  The Modbus TCP source is used to receive data from a device compatible with the Modbus protocol. Modbus TCP does not have any built-in source variables. All variables are custom variables, which must be created under the DataXchange Tab → Variable → ...

• SRCE Viewer

  The SRCE Viewer connects to an SRCE from the DataXchange client for testing purposes. This can be accessed from the Connectivity tab when not logged, or from the DataXchange tab when connected to the DX Service.

• MTConnect Data Viewer

  The MTConnect Data Viewer is used to display the data stream values being returned from an MTConnect enabled machine. Data is refreshed every second when the viewer is connected. The MTConnect viewer can also be accessed through the connectivity tab ...

• Fanuc Focas Viewer

  The Fanuc Focas viewer allows users to connect to Focas systems directly from the DataXchange Client. This makes it easier to determine what data is coming from the control under different circumstances so expressions can be built around these ...

• Configuring the Fanuc 31i Control

  The Fanuc control must be configured in order for the communication to take place. The configuration consists of setting standard TCP/IP network properties. The steps to configure the control may vary from model to model. The following steps are for ...