Connectivity Tab

Connectivity Tab

The Connectivity Tab is only accessible when you are NOT logged into DataXchange. This tab contains functionality relative to testing the following connections:
  • FOCAS
    • Test
    • View
  • MTConnect
    • Test
    • View
  • Scytec SRC with Ethernet (SRCE)
    • Test
    • View
  • Scytec SRC over TCP
  • Caron TMAC
  • HAAS NGC

No permissions are required to use this feature and it is available for anyone even without an Account within DataXchange.



    • Related Articles

    • SRCE Viewer

      The SRCE Viewer connects to an SRCE from the DataXchange client for testing purposes. This can be accessed from the Connectivity tab when not logged, or from the DataXchange tab when connected to the DX Service.

    • Connectivity Monitoring and the RTV

      DataXchange can monitor the connection health of three different types of communication. The first is Equipment Connectivity Health which refers to tracking the time in which the DataXchange Service has a connection to the Equipment Source such as ...

    • MTConnect Data Viewer

      The MTConnect Data Viewer is used to display the data stream values being returned from an MTConnect enabled machine. Data is refreshed every second when the viewer is connected. The MTConnect viewer can also be accessed through the connectivity tab ...

    • Using FOCAS in DataXchange

      Focas Communication as a Source Setting the Fanuc Focus communication as a source will be the most common configuration because this will acquire information about the control. Setting up Fanuc Focas as a Source is done by going to the DataXchange ...

    • Modbus TCP Source

      The Modbus TCP source is used to receive data from a device compatible with the Modbus protocol. Modbus TCP does not have any built-in source variables. All variables are custom variables, which must be created under the DataXchange Tab → Variable → ...