DataXchange | Haas | Knowledge Base

Haas
Using HAAS NGC in DataXchange
DataXchange supports data collection directly from the HAAS NGC. A HAAS NGC enabled control can be setup as a Source for data within the DataXchange software Setting up HAAS NGC as a Source is done from the DataXchange tab, selecting the associated ...
Configuring the Haas NGC
Before DataXchange can communicate with this system, the IP address must be set on the control. Most HAAS NGC controls support a wired or a wireless Ethernet connection. For a wired connection Select the Wired Connection tab in the Network tabbed ...

Haas